Recent content by Jambo21

OK... I am getting a 4 point YJ cage for my cj7. 2 questions I need answered. 1) Is putting in sandwitch plates good ebnought for the cage attaching to the front floor board or do I need to tie it into the frame? I do not do much serious off roading or climbing. It is mostly a safety issue for...

I was recently in a small fender bender with my 8 and 4.5 year old boys with me. I only have a sport bar with lap belts in the back seat of my CJ. I want to get a "family" cage out of a YJ so Ican at least get them shoulder belts and a little more cgae around them in case something worse...

Thanks. I have found the Jeep community very friendly. I have been a jeep owner for a little over a year now. It can be love or hate... depending on how my jeep is running.:-)

Check at Pick up salvage on S. Union Ave. in Bakersfield. I was there today and he has 4 or 5 CJ's he is dismantleing.

I am not really Southern California. I am in the southern central valley. It does get cold here. I am not talking teens but It can get cold (40's).

AS I have found out winter time in a soft top jeep can get cold, and it is no where near it being as cold as it can get! Obviously CJ7 full and half doors will work on my CJ7. Up to what year will YJ doors fit on my jeep? All the way up to 95? will both YJ half and full doors work?

I had electrical sending units for both temperature and oil pressure, but was not happy with the performance. I put it in mechanical sending units for both. The pressure is fine when driving but it drops very low at idle. Would it be something wrong with the rebuild or would it be a periferal...

So I got my jeep back today and it was a bad exhaust valve. The place that did the rebuild fixed it all at no cost to me. It is good to see people still honor their workmanship. Now it seems that the oil pressure is running low (5-10lbs) at idle (750 rpm). A new OEM oil pump was put in at...

I just has the engine rebuilt on my 82 CJ7, put in a Howell TBI. Everything was going fine. I put 1100 mile on my Jeep in two months... until last week when the engine started to feel weak and it felt like it was lunging. I ran a compression test on all of the cylanders. I did a compression...

I just had my 258 rebuilt and the people who did it only offered a long block rebuid. The oil pan leaks like crazy! Any hints on how to stop it. I have a new gasket set ready to replace it. I realize it is a jeep and may leak a little bit but not to the extent it is leaking now. Any little...

I tried several times to go to different Auto parts stores and they were all not very helpful. The problem was that most reputable auto parts stores are not open on the weekends. I originally got the identicle plugs that were already in it but they swapped the head out on the rebuild (mine was...

I just had a the engine rebuilt on my 82 Jeep CJ7 with a 258. The head was cracked and they found a new one (I am am not sure what year Jeep the head came off of). Long story short.., I went to put the plugs in today and the threaded portion of the plug was too small. Do you know of any...

Grizzer, How much did you get that Tire cover for? I would be interested in getting one for mine too!

Here are the pics of my Jambo. I had to push it out of my Garage. I won't be driving it for a while untiil I can get the engine rebuilt.:cry:

Grizzler I can Already tell I like you by the sticker on your right bumper!