Search results

After looking around for used car racks, and with the help of the folks at Sports Rack, I came to the conclution that the way to go is to get the factory rails off an explorer or expedition and cut them a tad to fit the length of the hard top. I also got some towers and crossbars of ebay that...

Re: Black Smoke On the rear spring spacers, where does the flat part of the spacers go? I dont know if the springs are in the correct position. There is no spring stopper in the bottom of the rear spring pad that holds the springs in the correct place like the front does. Does any one know...

Why would the bracket say 97-02 tj with ax5 or nv3550 if they dont even make it for a 97?

Its a 97 4.0 5-speed, I need this transfer case shifter correction bracket, and it says it only for ax5 and nv3550 trans. hope i have one of the two. http://www.acmejeepparts.com/cgi-bin/sgin0102.exe?T1=12521+901&UREQA=1&UREQB=2&UREQC=3&UREQD=4&FNM=01&UID=2003112015144870

Yeah man, your rack is the sickness! Its exacly what im looking for, The local rack place here says they dont make anything for a wrangler with out going the congo cage rought, but im determined to manipulate some kind of rack to fit mine. Im going to check into the "mini roof system" Thanks...

Rolled Jeep What did you do to fix your caliper, or did you just replace it? Mine is doing the same thing, its off and on but sometimes it gets stuck.

heres a list: White black red blue tan green and yellow (i think) actualy, Check out http://www.autocolorlibrary.com/scripts/depot.exe?pgm=aclgate.bbx

thanks nick! I dont want a Congo Cage Rack, looking for something that attaches to directly to the Hard Top like in the pic.

I want to get snowboard rack just like this jeep that I found on an earlier post: What I was wondering is what hardware do i need, and how does it attach to your top?

Hey, great pics, Just wondering how you attached your high lift jack on your front bumper? Is it stable and locked on or could someone take it easily? thanks, -jake

sorry, i only needed two,and found them at the central4wd for 33 bucks, you might try relisting them on ebay.

Im looking for spacers just for the rear of my TJ, anyone have a couple extra? -Jake

company

The brand is SuperLift, I purchased on ebay. Does anyone know if superlift has any kind of warrantee on springs?

I'm looking to raise the rear end of my tj with spring spacers because of the added wieght of my hardtop/rack/33 tire on rear. Is it a good idea to put 1.75 or 2 inch spacers just on the rear, with my 4inch suspention lift? Right now, it is noticably higher in the front. Ive only had the lift...

Elvis has left the building. When I got my tj there were aftermarket kc lights on the front that did not work. I put in the factory switch in the console (it pluged right in) and now the switch lights up at night when the car is on, but i cant find were the wire harness runs under the hood or...

yeah, i got my alighnment done, and I notice the claws, its a different vibration, deffinatly from the front. It sounds just like just what dick's tawken about, right around 1250 or so. where are transmission mounts, and how difficult are they to change? hey dick, Did you bend the bumpstops...

BostonJeep, BostonJeep wrote: jake give me a link to the original and ill do my best to make it small and clear Thanks man, its http://www.imagestation.com/picture/sraid81/p02c0de53f8863b62a2387ed6778f6c3e/faf21df1.jpg hope that works -jake _________________

I have a transfercase drop. My rear driveline is not the problem, it sounds like its comming from the front. Yes its only in first gear from a stop. Ill check out the motor mounts, thanks newman

just put on my lift and I noticed a tiny bit of what i think is front driveline vibration. It very minimal, noticed in first gear while accelerating from a stop. I can adjust my new front lower control arms, but How can you tell if thier in the right spot?