Search results

maybe your idle control valve is no good anymore? the pump holding pressure, do you mean its not putting out the required pressure for running or it bleeds down after you shut the truck off? if it bleeds down after shutting off, that won't effect the running issue but you can buy little...

your idle control valve And its area of the throttle body are clean?

holy crap!! that is bad luck

Ok. Good info

To get rid of fuel injection, you can remove everything but you might need to get a different distributor. You need to find out if your current distributor has vacuum or weight centrifugal advance or if its electronically controlled by the ecu. If its controlled by the ecu, you have to see if...

I haven't done a 4.0 but i have done a few vehicles. For you, an offenhauser intake for a 4.2 and holley 390cfm four barrel will work great. Thats what i out on my 87 wrangler and the gas mileage and power improved unbelievably. I tried the motorcraft two barrels everyone loves but the 390...

i found an article on the 2wd wrangler but i don't think its 100% correct. it says only 2wd was available from 2007-2010. https://www.autotrader.com/car-news/jeep-once-sold-two-wheel-drive-wrangler-and-it-was-weird-281474979998290 maybe they say that because it was available at the...

i bet the heat is what is doing it also

that is how ours have been. my wife loves wranglers but she doesn't do anything in it that it is made for. she uses it like a civic or mini van. her old 07 jku was the best wrangler for her, ever. it was 2wd, ha ha ha. she didn't even know it wasn't 4wd nor ever noticed the transfer case...

i have a question guys, do soft tops need to be treated any differently when you are in the snow? not so much the vinyl black part but the windows? do i need to be particularly careful when its very cold or the windows will split or crack? we have had lots of wranglers over the years, i...

the newest model, the jl, is very very nice compared to past jeeps. the interior is so much more refined than even the jk model. and the 2.0 with e-torque is awesome. my wife has the jl unlimited (jlu) which is the 4 door and its a 2019 model with the 2.0 turbo motor and e-torque (has a small...

Welcome!!

No idea from me

i have found the best way to loosen stuff like that is with the longest breaker bar i can find so i can apply smooth easy torque. turn it a little and then turn it back the other direction to clear the threads. than turn it some more and go backwards to clear the threads. just keep doing it...

there is no easy way to find out what came in it. jeep has changed owners so much that no one kept the records, it always seemed to me when trying to find info. it would probably be better to take a picture of whats in the engine bay and what transmissions/t-case is on it. tons of people...

thats a lot of metal to remove. google has not been anble to answer that for you? i have never heard of anyone going up that much

wow, thats crazy.

those are very similar to chevy columns, like if i remember right, since yours is an early cherokee, it might be a chevy column. compare yours to some chevy camaros and trucks, even the small trucks.

probably just to allow for flexing, like you are talking about. connecting the frame to the body and adjusting for the body mounts flexing over bumps and stuff.

you have a blend door that is not operating properly to the driver side of the truck. the one that stops the outside air and takes air form the heater core is not working. it could be vacuum operated or electric, i am not sure on your truck. and it could just be broken even though the power...