Search results

  1. 8177

    Tire carrier fitment

    Will the swing out tire carrier and traction bars from an 87 fit an 81 CJ7, Need the tire rack fitment most of all. the traction bars come with the rack If they fit I'll use them If not I'll sell them. If the 87 tire rack wont fit what is the issue with it. Thanks Jim
  2. 8177

    hot in run and start

    Had to take the dash off to do it But I found a good 12VDC for the computer
  3. 8177

    hot in run and start

    I'm not over thinking anything. I simply need a hot in R/S to power the computer for the Howell Kit. The previous owners have mutilated my wiring harness. There is a birds nest of wires under the dash some just hanging others with two or 3 taps off the line. Some with 2 or 3 different colors...
  4. 8177

    hot in run and start

    Need to supply power to the computer for a fuel injection kit.
  5. 8177

    hot in run and start

    I,m sure some of you are following the FI install follies. As you know my wiring harness was severely butchered. I bet I don't have 10 inches of original wiring without some caveman splice or wire replacement. I need a wire that is hot in run and start. I have tried the red w/white tracer as...
  6. 8177

    what goes in this

    I'm way ahead of you on that one for a change, LOL. Ran some blue rtv from permatex on it. I stuck some modeling clay up in the hole yesterday to make a cast of the threads. Fine instead of pipe thread.
  7. 8177

    what goes in this

    I saw a post where a guy used a oil pan plug. 7/8 18 is the size. might be a winner.
  8. 8177

    what goes in this

    Do you remember the size of the plug?
  9. 8177

    what goes in this

    Cant find a pipe plug to use. What goes in the hole just above the manifold heater hole. Any ideas. the only thing I found close was one of the connectors on an electrical box that holds the conduit on it. I just started trying to use anything I could to get the thread. Its fine pitch and bigger...
  10. 8177

    81 CJU7 Fuel injection install underway

    I am beat. Its over 100 outside and all I need is a power source that is hot in run and start. My whole harness was butchered by one of the previous owners. Can someone tell me a place on the fuse panel that is hot in start and run. The panel is the only safe place to go. And I am dying out...
  11. 8177

    81 CJU7 Fuel injection install underway

    Almost done. Need to pick up some more Vac line and some T's. Need to hook up the power. Think I found a good spot on the fuse panel. I need an on in start and run. I think IGN LPS where the 3 amp fuse is will work. I don't want to go turning the key on and off checking for voltages with...
  12. 8177

    81 CJU7 Fuel injection install underway

    You have several!!!! Well Yes I need one. I ordered one that is close and I dread the Smog guy saying its not going to pass because of that. Can you PM me the details. Thanks
  13. 8177

    81 CJU7 Fuel injection install underway

    Show of hands. How many thought I would be done today. Well I might have if I didn't have to drop the fuel tank. Had to take the line they were using for the evap canister to tank and make it the return line. Its probably how it was in the beginning. Then run a line for the evap canister. So...
  14. 8177

    81 CJU7 Fuel injection install underway

    Thanks, I found a good diagram and explanation of the operation building from the links you sent. Already have the relay and the coolant switch. Just need to wire it up.
  15. 8177

    81 CJU7 Fuel injection install underway

    Lots went on today as far as looking for parts. For the manifold heater. I have to have it for the kit to keep its CARB EO Number on my vehicle. I was passed on info by policemonkey 161 that allowed me to get a decent wiring diagram. a Part number for the relay I need and information to get a...
  16. 8177

    81 CJU7 Fuel injection install underway

    Don't need to buy a switch after all. One is in the Howell kit and I believe the wiring goes to and from the computer in the kit now. I found some part numbers with ploice monkey161's help though if anybody needs them. Still need help with p/ns for the rear molded manifold heater hose. Front if...
  17. 8177

    81 CJU7 Fuel injection install underway

    I was calling them the wrong name on my searches. That will help right there. thanks And yes the hoses I want are the stock or prebent heater hoses from the thremostat houseong or water pump to the front of the intake then out the back of the intake to the heater core. these come up at 90 degree...
  18. 8177

    81 CJU7 Fuel injection install underway

    Shout out for more assistrance. This would be way easier if I wasnt changing so much at one time. I need a pic from the side of the intake manifold. Needs to be the set up where the intake and exhaust are not bolted together. I need a clue to how to wire a relay ( well I know relays very well...
  19. 8177

    81 CJU7 Fuel injection install underway

    I have only doubled up when the exhaust manifold was warped. I just used one this time. Well who would have thought that I would need new exhaust and intake manifold bolts. that certainly threw a wrench in the gears last night. Just barely had enough to hold them in place till I get more. I...
  20. 8177

    81 CJU7 Fuel injection install underway

    The exhaust Manifold Came in. It had two exhaust gaskets. I just bought a gasket kit that had an exhaust and an intake gasket. oarts dude said to use both metal backed exhausts and not the fiber intake exhaust. I have doubleed up on exhaust gaskets when there was an issue withbeing flat. What now
Back
Top