Search results

yea i got one cursed with manual steering.

I was wondering if I was correct to assume to get power steering all I have to do is change the steering box and add a power steering pump. I am recovering from broken ribs and that manual steering keeps setting me back.

replaced front axle . axle seals , bearings , with 1987-2006 JEEP WRANGLER YJ TJ DANA 30 FRONT END USA 4340 CHROMOLY AXLE KIT, i got new in box for 150.00. I also changed center link and drag link. luckily ball joints were good or they would have went too. Also changed steering stabilizer...

I have a friend who owna an ammco across the etreet, I went to get him to order part. There is a 95 wrangler there with a blown engine, has a 44 in front and 8.8 in rear. he is not going to fix it, trying to buy it for parts.

90 yj front axle( dana) 30 is leaking out end of tube. any idea if these are the right seals ? Alloy Usa Axle Tube Replacement Inner Seal For 11105 & 11106 ALL-11109

A cheaper option Alloy USA Axle Lock Kit Dana 30 ALL-450900 and $10.00 more for lifted vehickle

I was wonder could a 6.2 diesel from a 90 suburban fit in a 90 yj. I have the whole suburban, was rear ended and insurance co. says its totaled. I know it would be a pain in the ass if at all possible, but is it at all possible ? Or should I just find another suburban ? engine and trans have...

Put on new tires, front bumper, new console. time to start sanding the ridiculous pin striping off and rhinoline it.

installed an instatrunk and started prepping for paint job

I drove 12 hours to buy full doors from my cousin for 200, he said they need some work, all they need is locks paint and a good lube.. I got tired of not having heat, flushed the system yesterday. Well now my radiator and heater core both leak. I ordered radiator, heater core, and a fan motor...

My light has a mind of it's own comes on when I lugging at low RPMS

here is a link to a discussion on how to do it.. Nutsert for Transfer Case Removal and Install - JeepForum.com and a link to buy cheaper ones http://www.mcmaster.com/#95105a169/=8bw6ok for 1/2 inch and http://www.mcmaster.com/#95105a209/=8bw7gv for 12 mil used on newer jeeps

Thanks Steel, With The info you gave me I came up with, Nutserts. $74.00 for 6 and 6 bolts from the dealer. Anyone know where to get them cheaper?

I was crawling around under my 90 YJ this morning.trying to find a rattling noise and I notice that my skid plate is hanging on with 3 bolts. Two bolt heads are through the plate and one the head is missing. Two of the 3 left just spin...

I was wondering how involved it would to to install D44's from a Scout 2 in my 90 YJ.

Most people around where I live wave. And last Sunday, Leaving Pocono Raceway, I found that my gas gauge is off by over a 1/4 tank. I had not been pulled over out of gas for more than 2 minutes and 3 Jeeps stopped to help me. there was a XJ, CJ, and a Rubi there to help in no time flat. Drove...

My brother has a 92, he has had it since 95, and other than a clutch, exhaust, and the normal things that wear out (brakes and tires,belts and hoses) he has not had a problem. But now body rust is becoming a factor. I have a 90, my father was original owner, I have no rust, but have had a...

A lot of time it is just dirt and road salt that makes them stick in, It happened to me yesterday as well. some times you can clean and oil them and reuse them. I cleaned mine up and put it back on.( Auto zone won't have new ones till tomorrow) after work tomorrow I am replacing both calipers ...

I have soft doors on, they don't lock. Too lazy to flip the seat I guess.

Someone cut the window on my 4 month old pavement ends flip top and stole a broken nail gun. I have soft non locking doors, and they weren't smart enough to open the door. Does anyone know where I can get a replacement window? It seems Pavement Ends does not sell replacement parts, only full...