Search results

I'm getting 15.79 miles per ( US) gallon in the midst of winter, i assume better in the summer 4.0L stock tires etc. 6-speed

no need to be sorry, thats great info thanks!

I did a lot of reading about oil filters tonight, my mind is spinning, you read a good thing about one, then you read something trashing it. Wix filters seem to have a real following, but also people who say its crap. The one that everyone seems to agree is at least ok is Purolater. Fram is...

interesting......... 4.7 litre jug of Pennzoil Syn in a fancy bottle with a handle... $34 at walmart 4,3 litre jug of the same stuff in a boring bottle.... $19 at walmart and extra $15 for .4 litres and a fancy jug. wtf?

I found that with my old Dodges as well, Fram made 2 filters, a long one and a short one. i agree with you, long is better. I have wonded if there is a long one for my Jeep, there's definately enough room to put one on, Any idea which long fram would fit a 2005 tj 4.0? My parts place just...

I think this is the only automotive forum that i belong to that doesn't have a thread about oil, oil filters and oil additives. So i started this one :p I currently use pennzoil snythetic 10w30 becuase a) I researched synthetic oil and the opinions ranged from " it's amazing" to " shrug, no...

that seems to be a common problem with jeeps. Theres a vacuum line coming out of the fire wall on the passenger side, goes to the drivers side, about 1/2 way up the motor ( toward the front of the jeep on the drivers side) the vacuum line fits on a nipple coming out of the engine. The boot on my...

Isnt really a decision to make at the moment, but when the times comes I will probably get steel, that's why I was wondering if there was a reason not to. Just doing some learning about tires and rims. interestingly my current Wrangler 30-9.5-15 tires are actually only about 7 1/2 inches wide...

well thanks everyone for your informative ( and humourous) replies!

I was reading " biggest mistakes I made" on another board and several people mentioned that buying steel wheels was a mistake, without saying why it was a mistake. What's so bad about steel wheels? ( I'm asking here rather than the other site because I don't belong to that one)

I think the first thing I'd do is replace the sending unit, thats a cheap, easy way to start your problem solving. When the pressure goes to zero does the engine get really noisy? if not I would think it is a sending unit problem rather than actual low pressure... just my best guess...

hehe that crossed my mind as well............

thanks Gordy

Gordy.. I was thinking of putting the 31x10.5 on my 2005 I6/stick, 3.73... was your speedo out much? No rubbing without a lift?

I had the exact same prob on my Dakota and cleaning the AIC valve and throttle body fixed it.

Thanks BH !

Ah that good to know, thanks. Yes, need the hardware as well, starting from scratch, just have the hard top it came with. The ad in Quadratech said it came with hardware I think.

I need a soft top for my 2005 Unlimited, checked in Quadratec and see that the Bestop is about $800 and the Mopar one is $1400 is there a quality difference that justifies the price difference or is this just typical dealer rip off pricing? Any recommendations or info regarding soft tops would...

Yes the snow was to the top of my tires

Guess I shoulda pulled it a little farther into my shed