Black Betty no start

[superj]

I think our admin guy gave up. I have marked so many of that guys exact repeat post as spam and his account as hacked but they are all still here. I started marking them monda or sunday night

 

[Turbogus]

Yep! Just as I suspected. The Float settings were way off. This'll be the last time I use caliper conversions for Float settings. I also went with conventional needles as the "off road" ones were a little sticky. If I have time I'll remount the AFB and see what happens.

 

[Turbogus]

After reinstalling the carb and setting the Air Screws 'Black Betty' fired right up.
Next I've got to remount the Coil, there's a mass of wiring where it normally goes from the scabbed in Ford PDB I used to wire in all of the accessories.

 

[Turbogus]

Most of that wiring were ground wires going to the ground bus bar on the firewall. It took a little doing but I now have the Starter Solenoid mounted on the lip of the dual battery tray. I was able to revert back to the Blue Streak Solenoid and now I have easy access if something goes wrong.