Ok i hope you guys can help.
I have a Jeep cherokee limited 1994.
The problem is that i have very little heat or no heat at all through the heaters.
The coolant systme has been flushed, the thermostat has been changed, still with no joy.
It has been bleed properley and both the heater matrix hoses are hot !
So what happens -----
If i allow the jeep to warm and have the heater on the first blow postion i will get some heat but it will eventually fade away - about 1 min.
If i put the blower on any higher position i just get cold !,
Any help would be greatful !.
Thanks, Ian
I have a Jeep cherokee limited 1994.
The problem is that i have very little heat or no heat at all through the heaters.
The coolant systme has been flushed, the thermostat has been changed, still with no joy.
It has been bleed properley and both the heater matrix hoses are hot !
So what happens -----
If i allow the jeep to warm and have the heater on the first blow postion i will get some heat but it will eventually fade away - about 1 min.
If i put the blower on any higher position i just get cold !,
Any help would be greatful !.
Thanks, Ian