Mustang seats in jeeps?
- Thread starter joeycj5
- Start date
joeycj5
New member
1054791
I did find this page about the swap.
http://www.jeepaholics.com/tech/mustangseats/mustangseats.htm :-O [addsig]
I did find this page about the swap.
http://www.jeepaholics.com/tech/mustangseats/mustangseats.htm :-O [addsig]
1054793
I saw the same article, bought a set and put them in, fit my 89 yj perfectly. The article said about a half hour to install, took me about 1 and 1/2 hours by the time I took the old seats out and re-installed the new ones.
edited by: monsterrd, Feb 12, 2003 - 01:26 PM[addsig]
I saw the same article, bought a set and put them in, fit my 89 yj perfectly. The article said about a half hour to install, took me about 1 and 1/2 hours by the time I took the old seats out and re-installed the new ones.
edited by: monsterrd, Feb 12, 2003 - 01:26 PM[addsig]
Tug-n-pull
New member
1054880
I am there going to junk yard later today to see what we can find!
I am there going to junk yard later today to see what we can find!
Later Tug[addsig]
1054897
The seats look basically the same,height wize,you use your own risers and sliders,maybe about one inch higher if that. Also if you go to that website that joey posted he has pictures of the whole process,info, and pics of the finished product. I did find out that they are slightly wider, made my center console a bit tighter. I would send some pics of mine,but haven't figured out how to do it yet. :-D :evil: :-x :-D
edited by: monsterrd, Feb 13, 2003 - 01:53 PM[addsig]
The seats look basically the same,height wize,you use your own risers and sliders,maybe about one inch higher if that. Also if you go to that website that joey posted he has pictures of the whole process,info, and pics of the finished product. I did find out that they are slightly wider, made my center console a bit tighter. I would send some pics of mine,but haven't figured out how to do it yet. :-D :evil: :-x :-D
edited by: monsterrd, Feb 13, 2003 - 01:53 PM[addsig]
Tug-n-pull
New member
1054969
What have you had to pay for a good used set of Mustang Seats? Tug[addsig]
What have you had to pay for a good used set of Mustang Seats? Tug[addsig]
1054982
I paid 79.00 plus tax, some guys wanted upward of 200.00 mine were from an 87. The later the year the more they go up, also stay away from mustang gt's very high dollar. There were 3 small tears in mine, but I put seat covers on them anyways, good luck hunting. I went to about 7 places before I found some that were reasonable.
edited by: monsterrd, Feb 14, 2003 - 12:58 AM[addsig]
I paid 79.00 plus tax, some guys wanted upward of 200.00 mine were from an 87. The later the year the more they go up, also stay away from mustang gt's very high dollar. There were 3 small tears in mine, but I put seat covers on them anyways, good luck hunting. I went to about 7 places before I found some that were reasonable.
edited by: monsterrd, Feb 14, 2003 - 12:58 AM[addsig]
WillDriggers
New member
Re: 1054982
I have a 1976 CJ-5 and I needed to replace the seats. After reading this forum and a bunch of others, I found the apparently various years of Mustang seats will work. So, I took a shot at it and went to a local salvage yard and found a pair of 2004 Mustang GT seats, black leather for $175. Took them home and with very little fabrication here and there, the worked just fine. The look great and fit very well, not to mention comfortable. Just wanted to put this info out there for anyone who was trying to do the same thing.
I have a 1976 CJ-5 and I needed to replace the seats. After reading this forum and a bunch of others, I found the apparently various years of Mustang seats will work. So, I took a shot at it and went to a local salvage yard and found a pair of 2004 Mustang GT seats, black leather for $175. Took them home and with very little fabrication here and there, the worked just fine. The look great and fit very well, not to mention comfortable. Just wanted to put this info out there for anyone who was trying to do the same thing.
Similar threads
