Search results

It has a crush seal so if you over tighten it it will fry the bearing pretty quick (I have heard that anyway.) The books I have read say to use an inch lb torque rench check the amount it takes to turn then remove nut replace seal then when you are putting the nut on you tighten a little then...

Well first you would need a power brake bracket. You can get that from Keep-It-Jeep also. then you can get a new booster/mastercylinder from Parts plus for $150+30 for the core you don't have. You may be able to pick one up cheep but I wanted to make sure my jeep would stop. Then you may...

That is half the fun isn't it. Hey my paint cost $24 including masking tape.

I am pretty sure you can take the doors off. Most states require 2 mirrors. you can have a left and rear view (as long as the rear view is not blocked by anything) or 2 side mirror. You can pick up mirrors that fit into your door hinge or you can get relocation brackets. You don't need a...

Get some pictures when you get it home.

If it is geared right hop in and drive. I you have to drive to get it you could pick up a tow bar, or rent a trailer (assuming you can get your hands on something to pull it with). You can start the trip and if you don't think you can drive it you could rent something. I am trying to...

Just go get it and put it back together yourself. Pick up a tow bar and tow it home with the XJ

I have not seen one in real life yet but after trying to stuff all of my wife 1.75 kids and the rest of the crap into a CJ5 it look very appealing. I just hate payments though.

No you do not need a new shaft. Just a new end to the shaft. I would cruise over to Keep-it-jeep. just south of 90th on state back in a dirt lot talk to Five(I don't know if that is his real name but that is what he goes by). I paid $200 and got everything. I did have to replace the high...

I have never replaced them so I do not know how to get the shafts out, but I found a really good tool to press out the U-joint. Harbor freight has a Ball Joint press thing that you can also use to remove U-joints. It works great. It is like a giant c clamp. I think is was like $40 and I have...

I would guess you fried a senser. Take it to autozone and have them check your codes.

SS Wrangler As I have replaced bits and pieces it gets a little better each time. I put poly bushing in the shackles and it seemed to help but my old rubber ones were dead so that is expected. I have also heard you can tighten the stearing box, yours may be too tight causing binding, or you...

NO V8 You can pick up a steering wheel puller pretty cheep.

Chev has ownes saab for a while now. Just like ford ownes Volvo, Jaguar (thats why the actually almost work now), and I think land rover (not sure it may be GM that owns land rover) Mercedes owns chrysler therby owning Jeep.

Stupid thing logged me out after typing a responce. here is the readers digest version Tillman is a hero anyone who serves to protect us is a hero, anyone who will give up 3.6 mil to help someone else is a hero whoever wrote this is ignorant and should be ashamed they are in America.

You need to shop insurance. Even if you are high risk it should not be that much. Find a new insurance copany, and get an older Cherokee. Both will bring that down a lot.

I have had a few sets on cars I have owned. I have never bought them, they are way overpriced. Same with the Goodyears. If I were to buy a namebrand I would go BFG, but I am too cheep and buy knockoffs.

Mazda/ Ford same thing.

Parogon would be the perfect place to scratch the wheels up so badly he would have to switch back to the old ones.

Thanks JPS